Powerware 9390 Installation & Operation Manual page 18

UPS Installation Plan and Unpacking
3. Set the pallet on a firm, level surface, allowing a minimum clearance of 3m (10 ft)
NOTE
top of the unit. Do not remove the debris shield until installation is complete.
4. Remove the protective covering from the cabinet.
5. Remove the packing material, and discard or recycle them in a responsible
6. After removing the protective covering, inspect the contents for any evidence of
NOTE
and other harmful contaminants. Failure to store and protect the UPS properly may
void your warranty.
2-4
on each side for removing the cabinet from the pallet.
The UPS cabinet is shipped with a debris shield covering the ventilation grill on
manner.
physical damage, and compare each item with the Bill of Lading. If damage has
occurred or shortages are evident, contact your Powerware service representative
immediately to determine the extent of the damage and its impact upon further
installation.
While waiting for installation, protect the unpacked cabinet from moisture, dust,
Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev A
®