Figure 8-16. System Setup Level 1 Screen - Powerware 9390 Installation & Operation Manual

The System Setup Level 1 screen can be used to set the UPS date and time, the serial
ports, change the Level 1 password, and logout of Level 1. In addition, the Level 0
functions are available. Figure 8-16 shows the System Setup Level 1 screen.
Use the
SELECT pushbutton to display the function screen.
The Level 1 screen will timeout after 60 minutes, or can be logged out at any time by
selecting the LOG OUT function from the menu screen.
Powerware 9390 UPS (40–80 kVA) Installation and Operation Manual S 164201535 Rev A
®
or pushbuttons to highlight the setup function screen desired, then press the
SYSTEM SETUP LEVEL 1
LOG OUT
ENTER PASSWORD
CHANGE PASSWORD
ENTER PASSWORD
CONTRAST ADJUST
VERSIONS
UNIT TYPE

Figure 8-16. System Setup Level 1 Screen

Using the Control Panel
SELECT
8-13