NETGEAR S350 Series User Manual page 290

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
Table 60. Detailed port statistics (continued)
Field
802.3x Pause Frames
Received
Total Packets Transmitted
(Octets)
Packets Transmitted 64
Octets
Packets Transmitted 65-127
Octets
Packets Transmitted 128-255
Octets
Packets Transmitted 256-511
Octets
Packets Transmitted
512-1023 Octets
Packets Transmitted
1024-1518 Octets
Packets Transmitted > 1518
Octets
Maximum Frame Size
Total Packets Transmitted
Successfully
Unicast Packets Transmitted
Multicast Packets
Transmitted
Broadcast Packets
Transmitted
Description
The number of MAC control frames received on the interface with an opcode
indicating the PAUSE operation. This counter does not increment when the
interface is operating in half-duplex mode.
The total number of octets of data (including those in bad packets) transmitted
on the network (excluding framing bits but including FCS octets). This object can
be used as a reasonable estimate of Ethernet utilization. If yo need greater
precision, the etherStatsPkts and etherStatsOctets objects must be sampled
before and after a common interval.
The total number of packets (including bad packets) received that were 64
octets in length (excluding framing bits but including FCS octets).
The total number of packets (including bad packets) received that were between
65 and 127 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
128 and 255 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
256 and 511 octets in length inclusive (excluding framing bits but including FCS
octets).
The total number of packets (including bad packets) received that were between
512 and 1023 octets in length inclusive (excluding framing bits but including
FCS octets).
The total number of packets (including bad packets) received that were between
1024 and 1518 octets in length inclusive (excluding framing bits but including
FCS octets).
The total number of packets transmitted that were longer than 1518 octets
(excluding framing bits, but including FCS octets) and were otherwise well
formed. This counter supports a maximum increment rate of 815 counts per sec
at 10 Mb/s.
The maximum Ethernet frame size the interface supports or is configured to use,
including Ethernet header, CRC, and payload. The possible range is 1518 to
9216. The default maximum frame size is 1518.
The number of frames that were transmitted successfully by the port.
The total number of packets that higher-level protocols requested be transmitted
to a subnetwork-unicast address, including those that were discarded or not
sent.
The total number of packets that higher-level protocols requested be transmitted
to a multicast address, including those that were discarded or not sent.
The total number of packets that higher-level protocols requested be transmitted
to the broadcast address, including those that were discarded or not sent.
Monitor the System
290