NETGEAR S350 Series User Manual page 284

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
The following table describes the per-port statistics displayed on the page.
Table 59. Port statistics
Field
Interface
Total Packets Received
Without Errors
Packets Received With Error The number of inbound packets that contained errors preventing them from
Broadcast Packets Received The total number of good packets received that were directed to the
Packets Transmitted Without
Errors
Transmit Packet Errors
Collision Frames
Link Down Events
Time Since Counters Last
Cleared
Reset Counters for All Interfaces on the Switch

To reset the counters for all interfaces on the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Monitoring > Ports > Port Statistics.
Description
The interface or LAG.
The total number of packets received that were without errors.
being deliverable to a higher-layer protocol.
broadcast address. This does not include multicast packets.
The number of frames without errors that were transmitted by the port.
The number of outbound packets that could not be transmitted because of
errors.
The best estimate of the total number of collisions on this Ethernet segment.
The total number of link down events on a physical port.
The elapsed time in days, hours, minutes, and seconds since the statistics
for the port were last cleared.
Access the Local Browser Interface
Monitor the System
Change the Default IP Address of the
on page 19.
284