Configure The Port Settings And Maximum Frame Size - NETGEAR S350 Series User Manual

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP

Configure the Port Settings and Maximum Frame Size

You can view, configure, and monitor the physical port information for the ports (that is, the
physical interfaces) on the switch.

To configure the port settings and maximum frame size:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > Ports > Port Configuration.
6. In the Frame Size field, specify the maximum Ethernet frame size that each interface can
support.
The frame size includes the Ethernet header, CRC, and payload. The range is 1522 to
10000. The default maximum frame size is 1522.
7. Select the check box to the left of the Port column to specify the interface for which data is
to be displayed or configured.
To select an interface, you can also enter the interface number in the Go To Interface
field and click the Go button.
8. In the Description field, enter the description string to be attached to a port.
The string can be up to 64 characters in length.
Access the Local Browser Interface
Configure Switching
Change the Default IP Address of the
on page 19.
103