NETGEAR S350 Series User Manual page 59

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
5. Select System > Management > DNS > DNS Configuration.
6. In the DNS Server Configuration table, select the check box for the DNS server.
Note: If you do not select a DNS server, all the DNS servers are removed
after you click the Delete button.
7. Click the Delete button.
The DNS server is removed.
Configure and View Host Name-to-IP Address Information
You can manually map host names to IP addresses or view dynamic host mappings.
Add a Static Entry to the Dynamic Host Mapping Table

To add a static entry to the local dynamic host mapping table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select System > Management > DNS > Host Configuration.
The DNS Host Configuration page displays.
6. In the Host Name (1 to 255 characters) field, specify the static host name to add.
Its length cannot exceed 255 characters and it is a required field.
7. In the IPv4 Address field, enter the IP address to associate with the host name.
8. Click the Add button.
Your settings are saved. The entry displays in the Dynamic Host Mapping table.
Access the Local Browser Interface
Configure System Information
Change the Default IP Address of the
on page 19.
59