Configure Dhcp Snooping Persistent Settings - NETGEAR S350 Series User Manual

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
This is the key to the binding database.
8. From the VLAN ID menu, select the ID of the VLAN that the client is authorized to use.
9. In the IP Address field, specify the IP address of the client.
10. Click the Add button.
The DHCP snooping binding entry is added to the database.
The Dynamic Binding Configuration table shows information about the DHCP bindings that
were learned on each interface on which DHCP snooping is enabled. The following table
describes the dynamic bindings information.
Table 18. DHCP Dynamic Configuration information
Field
Interface
MAC Address
VLAN ID
IP Address
Lease Time

Configure DHCP Snooping Persistent Settings

You can configure the persistent location of the DHCP snooping bindings database. The
bindings database can be stored locally on the device or on a remote system somewhere
else in the network. The device must be able to reach the IP address of the remote system to
send bindings to a remote database.

To configure DHCP snooping persistent settings:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
Description
The interface on which the DHCP client message was received.
The MAC address associated with the DHCP client that sent the message. This is the
key to the binding database.
The VLAN ID of the client interface.
The IP address assigned to the client by the DHCP server.
The remaining IP address lease time for the client.
Access the Local Browser Interface
Configure System Information
Change the Default IP Address of the
on page 19.
93