NETGEAR S350 Series User Manual page 287

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
The previous figure does not show all fields on the Port Detailed Statistics page.
6. From the Interface menu, select the interface for which you want to view the statistics.
7. From the MST ID menu, select the MST ID associated with the interface (if available).
8. To refresh the page with the latest information about the switch, click the Update button.
9. To clear all the counters, click the Clear button. This resets all statistics for the port to the
default values.
The following table describes the detailed port information that displays for a particular port.
Table 60. Detailed port statistics
Field
ifIndex
Port Type
Port Channel ID
Port Role
STP Mode
STP State
Admin Mode
Flow Control Mode
LACP Mode
Physical Mode
Description
The interface or LAG.
For normal ports this field displays Normal. Otherwise, the options are as
follows:
• Mirrored. The port is a participating in port mirroring as a mirrored port.
• Probe. The port is a participating in port mirroring as the probe port.
• Port Channel. The port is a member of a LAG.
If the port is a member of a port channel (LAG), the port channel's interface ID
and name are shown. Otherwise, Disable is shown.
Each MST bridge port that is enabled is assigned a port role for each spanning
tree. The port role is one of the following values: Root, Designated, Alternate,
Backup, Master, or Disabled.
The Spanning Tree Protocol administrative mode that is associated with the port
or port channel. The options are as follows:
• Enable. Spanning tree is enabled for the port.
• Disable. Spanning tree is disabled for the port.
The port's current Spanning Tree state. This state controls what action a port
takes on receipt of a frame. If the bridge detects a malfunctioning port, it places
that port into the broken state. The states are defined in IEEE 802.1D:
• Disabled
• Blocking
• Listening
• Learning
• Forwarding
• Broken
The port control administration state. The port must be enabled for it to be
allowed into the network. The default is Enabled.
Indicates whether flow control is enabled or disabled for the port. This field does
not apply to LAGs.
Indicates the Link Aggregation Control Protocol administrative state. The mode
must be enabled for the port to participate in link aggregation.
Indicates the port speed and duplex mode. In autonegotiation mode the duplex
mode and speed are set from the autonegotiation process.
Monitor the System
287