NETGEAR S350 Series User Manual page 203

S350 Series 8-Port Gigabit Ethernet Smart Managed Pro Switch Models GS308T and GS310TP
The System Information page displays.
5. Select Security > Management Security > RADIUS > Server Configuration.
The Server Configuration page displays.
6. Select the check box next to the server IP address.
7. Modify the configuration for the selected server.
8. Click the Apply button.
Your settings are saved.
Remove a RADIUS Authentication Server From the Switch

To a remove a RADIUS authentication server from the switch:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Switch on page 11.
Your web browser might display a security message, which you can ignore. For more
information, see
The login window opens.
4. Enter the switch's password in the Password field.
The default password is password.
The System Information page displays.
5. Select Security > Management Security > RADIUS > Server Configuration.
The Server Configuration page displays.
6. Select the check box next to the IP address of the server to remove.
7. Click the Delete button.
The RADIUS server is removed.
8. Click the Apply button.
Your settings are saved.
Access the Local Browser Interface
Manage Device Security
Change the Default IP Address of the
on page 19.
203