Configuration Of Ethernet Telemetry - Bosch DDU 10 Manual

17.4 Configuration of Ethernet Telemetry

17.4.1 Hardware Setup
Bosch Motorsport
3. Assign the desired channels to the channel types. The table below shows the function
of the available channel types.
4. Click 'Ok' when done.
Measurement channel
Distance
Lap number
Lap fuel
Lap time
The telemetry channels and their assigned channel types are displayed in the overview list.
The usage of ethernet telemetry requires the software upgrade ETHER_TELE (Enable ether-
net telemetry).
You can use ethernet telemetry to connect a transmitter on an ethernet line of your
device, to send the data to a pit unit and from there to your computer. It is also possible
to connect the ethernet line directly to your computer, for example when you use the
device on a dyno.
Function
Running distance of current lap
Lap number of current lap
Fuel consumption of last lap completed
Exact lap time of lap completed
DDU 10
Recording and Telemetry | 17
131 / 188