Recording And Telemetry; Features; Configuration Of Recordings - Bosch DDU 10 Manual

17 | Recording and Telemetry

17.1 Features

17.2 Configuration of Recordings

122 / 188
17 Recording and Telemetry
Some of the functions described below may require an upgrade. Please refer to the data
sheet of your device.
Recording
– Synchronized recording of DDU 10 analog and digital input channels, DDU 10 internal
measurement channels, ECU data, Data from external sensor interfaces
– Up to two independent recordings
– Measurement rate 1 ms to 1 s
– Two global start conditions (thresholds)
– Up to 16 measurement conditions (fast-slow-switches)
Telemetry
– Support for long-range online telemetry
– Individual programmable team code
– Fast block – slow block mechanism
– Programmable data rate
Burst telemetry
– Support for burst telemetry (BT 60)
– Programmable IP configuration
– BT 60 diagnosis via DDU 10
1. Expand the 'Logger' list by clicking on '+' in the DDU 10 Project Tree.
2. Double-click on 'Logging' in the DDU 10 Project Tree.
The recording configuration is displayed in the Main Area.
3. Alternatively, click on the 'Logger' tab to open the configuration directly.
DDU 10
Click on '+'
Double-click on
'Logging'
Bosch Motorsport