Bosch DDU 10 Manual page 40

6 | Analog and Frequency Inputs
40 / 188
5. Click 'Next'.
6. Define the settings for the sensor.
7. Click 'Finish' when done.
8. Enter the channel name and description.
9. Click 'OK' when done.
The channel is inserted into the DDU 10 Project Tree.
Channel is linked
to REV01
Available measurements for channel:
DDU 10
Number of teeth on the
pulse wheel
Circumference of wheel
for speed calculation
Choose data type of the
measurement variable
Enter name to automatically
create a new measurement sheet
Input pin
Number of Wheel
has hall teeth circumference
interface
Bosch Motorsport