Bosch DDU 10 Manual page 72

11 | Display Configuration
72 / 188
– Maximum value: Defines the maximum value at which the counting ends.
– Start angle: Defines the angle at which the ticks start.
– Angle range +/-: Defines the angle range of the ticks.
– Tick mark list: Here you can edit the tick mark position.
– Sub divisions: Defines the number of sub divisions between the main ticks.
– Conversion table: Here you can edit the conversion table.
– Fallback: Defines the displayed information when the value channel is invalid for the
enumeration box.
Conditional formatting (lower and upper limit respectively)
– Limit enable: Enables a lower limit and an upper limit respectively.
– Limit: Defines the threshold limit.
– Reset hysteresis: Defines the value as off when the hysteresis will be reset. You can
find more information about the hysteresis function in general in the chapter Hyster-
esis [} 42].
– Color value: Defines the color when the value is above/below the set threshold limit.
– Color title: Defines the new color of the title when the value is above/below the set
threshold limit.
– Color box: Defines the new color of the element when the value is above/below the
set threshold limit.
– Color gauge: Defines the new color of the gauge when the value is above/below the
set threshold limit.
– Color ticks: Defines the color of the ticks when the value is above/below the set
threshold limit.
– Color bar: Defines the color of the bar when the value is above/below the set
threshold limit.
– Color border: Defines the new color of the border when the value is above/below the
set threshold limit.
– Background: Defines the color of the background when the value is above/below the
set threshold limit.
DDU 10 Bosch Motorsport