Displaying Online Recording Diagnosis ('Statectrl_Ok'); Configuration Of Online Telemetry; Long Range Telemetry System Fm 40 - Bosch DDU 7 Manual

Display Unit DDU 7
13.2.6

Displaying online recording diagnosis ('statectrl_ok')

1.
2.
The 'Bit-LED' element shows the state of received channel data in bit-representation. A green
highlighted channel means 0, a red highlighted channel means 1.
–
–
–
–
13.3

Configuration of online telemetry

13.3.1

Long range telemetry system FM 40

440 MHz band
25 KHz bandwidth
10 W max. RF output
19.2 kBit/s data rate - unidirectional
RS232 interface
Full online track coverage on almost all tracks
Bosch Motorsport
To add a Recording Diagnosis element to a measurement sheet, change to page
"Calibration/Measuring" and drag a 'Bit-LED' element from the Toolbox and drop it on
measurement sheet.
Drag channel 'statectrl_ok' from the Data Area and drop it on the 'Bit-LED' element.
Measurement correctly initialized, but recording threshold(s) not reached: 254
Measurement correctly initialized, DDU 7 is recording data: 255
Values less than 254 indicate an error state
'statectrl_ok' can be linked to an alarm on the display. See chapter ''Alarm' display
element' for details.
Manual
Recording and Telemetry | en 117
04.02.2019 | V 02 |