Bosch DDU 10 Manual page 98

11 | Display Configuration
98 / 188
Value
– Init value: Defines the value, which will be shown in RaceCon during configuration or
on the device if the channel has no link. Allows testing the conditional formatting by
entering a representative value.
Size and position
– X-Pos: Defines the x-position of the top left corner of the alarm message within the
alarm area.
– Y-Pos: Defines the y-position of the top left corner of the alarm message within the
alarm area.
– Width: Defines the width of the alarm message.
– Height: Defines the height of the alarm message.
DDU 10 Bosch Motorsport