Bosch DDU 10 Manual page 81

Bosch Motorsport
a)
b)
c)
a) Choose the needed LEDs by clicking or via multiselect with ctrl + clicking
and define the color of the LEDs by right-clicking on one of the selected LEDs
b) Select if the LEDs blink or do not blink.
c) Choose the condition when the LEDs will flash.
- Create a condition using the Condition Creator. For more information see chapter "Creating a new
condition channel".
- Choose an existing condition.
d) Check the box to show a demo of the LEDs. (Important to check blinking)
To create a LED that alternately blinks in two different colors, choose 'Display "on" pattern' and define
the LEDs in the first color. Then choose 'Display "off" pattern' and define the LEDs in the second color.
The direction of the pattern changes for each side. For the LEDs on the left side the
pattern starts at the bottom LEDs (right side of pattern is for the top LEDs), and for
the LEDs on the right side the pattern starts at the top LEDs (left side of the pattern is
for the top LEDs).
2. Click 'OK' when done.
DDU 10
Display Configuration | 11
d)
81 / 188