Online Measurement; Setting Up An Online Measurement - Bosch DDU 10 Manual

7 | Online Measurement

46 / 188
7 Online Measurement
DDU 10 configuration
– System configuration (channel + display configuration, CAN I/O, etc.) is stored in the
DDU 10
– Use RaceCon to create and download configuration from the PC to DDU 10 Commu-
nication interface: Ethernet
– Communication protocol: XCP
Online measurement + calibration
– System status and diagnosis
– Check and calibrate sensors in the vehicle
– Live display of sensor values on the PC
– Use RaceCon for diagnosis, online measurement and calibration
– Communication interface: Ethernet
– Communication protocol: XCP

7.1 Setting up an online measurement

DDU 10 supports online measurement of sensor values and diagnostic variables.
1. Expand 'Measurement Container' and 'Measurement Folder 1' in the Project Tree and
double-click on 'Sheet1'. Alternatively, click on the 'Calibration/Measuring' tab to
open the window directly.
'Sheet 1' opens in a new 'Calibration/Measuring' window.
RaceCon changes
automatically
to "Calibration/
Measuring"
2. Click on the 'Folder/Sheets' tab, which appears when you are in the 'Calibration/
Measurement' window, to create a new measurement folder.
DDU 10 Bosch Motorsport