Bosch DDU 10 Manual page 179

Bosch Motorsport
The configuration of Input channels, CAN I/O, display, recording + telemetry will not be
changed.
1. In the DDU 10 Project Tree, right-click on 'DDU 10' and choose 'Synchronize' then
'Update firmware'.
A pop-up menu opens.
2. Select the destination of the firmware archive (PST).
You can find the latest firmware for the device at the Bosch Motorsport homepage.
3. Click 'OK' when done.
The firmware update starts. The DDU 10 displays the message 'Updating firmware'.
Do not switch off the car's ignition or interrupt the power supply of the DDU 10!
DDU 10
Firmware | 23
179 / 188