Adjusting The White Balance - Sony Digital Betacam DVW-700 Operation Manual

If a memory error occurs
If the error message ": MEMORY : NG" flashes on the viewfinder
screen for about 3 seconds when the camcorder is turned on, the black
balance memory content has been lost.
Adjust the black balance again. Contact your Sony representative if this
message continues to appear even after the black balance has been
adjusted again.
For more information, refer to the Maintenance Manual.
4

4-1-2 Adjusting the White Balance

Follow the procedure below to automatically adjust the white balance.
1
Set the switches as follows:
If the setting of the GAIN selector or WHITE BAL switch is
changed, a message reporting the set position appears for about 3
seconds in the setting change and adjustment progress message
display area of the viewfinder screen (in display mode 3).
4-6
Chapter 4 Adjustments and Settings for Recording
GAIN : Set as low as possible.
OUTPUT / DCC : CAM
WHITE BAL : A or B
MENU ON / OFF / PAGE : OFF