Removing The Camcorder From The Tripod Adaptor - Sony Digital Betacam DVW-700 Operation Manual

Removing the camcorder from the tripod adaptor

Red button
Removing the camcorder from the tripod adaptor
Note
The tripod adaptor pin may remain in the engaged position even after the
camcorder is removed. If this happens, press the red button against the
lever a second time and move the lever as shown below until the pin
returns to the stowed position. If the pin remains in the engaged position,
you will not be able to mount the camcorder on the tripod adaptor.
Stowed position
If the pin remains in the engaged position
Pin
Press the red button
against the lever and
move the lever
indicated by the arrow.
Lever
Chapter 5 Setting Up the Camcorder
5
5-35