Sony Digital Betacam DVW-700 Operation Manual page 37

2
Shooting and playback / record functions (3)
!ª TEST OUT (test output) connector (BNC type)
This connector outputs the video signal (standard level, 75-ohm
terminated) for the video monitor. The output signal can be selected to
be a composite, R, G, or B. The factory setting is composite, and the
setting returns to composite whenever the power is switched on.
Depending on the internal board setting, the setup menu can be displayed
over the image on the monitor.
For information about the setting for test output, see Section 4-9-3 "Selecting the
Test Output" (page 4-72).
2-24
Chapter 2 Locations and Functions of Parts and Controls