Sony Digital Betacam DVW-700 Operation Manual page 17

5 Lens mount cap
Remove this cap by pushing up on the lens locking lever. For protection
from dust, always insert this cap when no lens is mounted.
2
6 Tripod mount
Fit the supplied tripod adaptor to mount the camcorder on a tripod.
7 LENS connector (12-pin)
Fit the lens cable to this connector. Contact your Sony representative for
more information about the lens you are using.
8 Shoulder pad
You can move the shoulder pad forwards or backwards by loosening the
two screws. Do this to ensure the best balance when shooting with the
camcorder on your shoulder.
2-4
Chapter 2 Locations and Functions of Parts and Controls