Using Data On The Setup Card - Sony Digital Betacam DVW-700 Operation Manual

4-10-2 Using Data on the Setup Card

The operations of saving data to the setup card and reading the saved
data from the setup card are done from the SETUP CARD page of the
setup menu.
Note
You cannot access the SETUP CARD page when a remote control unit is
connected.
4
Writing data to the setup card
Follow the procedure below.
1
Set the MENU ON / OFF / PAGE switch to ON.
The page that was on the screen when the last menu operation ended
appears on the viewfinder screen. (When this menu is first used, the
lowest-numbered page of the currently selected pages for
configuring the menu appears.)
4-80
Chapter 4 Adjustments and Settings for Recording
Writing data to the setup card