Attaching A Uhf Portable Tuner (For A Uhf Wireless Microphone System) - Sony Digital Betacam DVW-700 Operation Manual

5-5-3 Attaching a UHF Portable Tuner (for a UHF
Wireless Microphone System)
Use of a Sony wireless microphone system requires a WRR-28H / 28M /
28L / 810A / 860A UHF Portable Tuner.
Attach the tuner to the camcorder as shown below. (The following
example uses the WRR-28M.)
Refer to the UHF portable tuner manual for more information.
When using a BP-L60 / L90 Battery Pack
1
(1) Attach the supplied tuner metal fitting to the back of the
camcorder.
1 Pass a screwdriver through the holes and tighten the screws.
2 Loosen the adjustment screws.
3 Adjust the metal fitting position for a BP-L60 / L90 Battery
Pack to be attached, and tighten the adjustment screws to fix
its position.
4 Attach the BETACAM holder kit supplied with the tuner to
the metal fitting.
(2) Attach the battery pack.
For more information about attaching the BP-L60 / L90 Battery Pack, see
Section 5-1-1 "Using a BP-L60 / L90 Battery Pack" (page 5-1).
Back of camcorder
Adjustment screws
Metal fitting
Holes
Chapter 5 Setting Up the Camcorder
BP-L60 / L90
BETACAM
holder kit
(Continued)
5-29
5