Adjusting The White Balance - Sony RMT-811 Service Manual

Adjusting the white balance

White balance adjustment makes white subjects look white and allows more natural
color balance for camera recording. Normally, white balance is automatically adjusted.
You can obtain better results by adjusting the white balance manually when lighting
conditions change quickly or when recording outdoors: e.g., neon signs, fireworks.
(1) Set the AUTO LOCK selector to the center (auto lock release) position while
(2) Press WHT BAL. The white balance indicator appears on the LCD screen or in
(3) Turn the SEL/PUSH EXEC dial to select the appropriate white balance mode
AUTO
1
LOCK
HOLD
Indicator
n (Indoor)
50
the camcorder is in standby, recording, or memory mode.
the viewfinder.
under the following conditions. As you turn the dial, the display changes as
follows:
(One-push white balance) y
Shooting conditions
• Adjusting the white balance according to the light source.
This operation is not available during recording. Follow the
procedure described on the next page to adjust the setting again.
(Outdoor)
• Recording a sunset/sunrise, just after sunset, just before sunrise, neon
signs, or fireworks
• Under a color matching fluorescent lamp
• Lighting condition changes quickly
• Too bright a place such as a photography studio
• Under sodium lamps or mercury lamps
(Outdoor) y n (Indoor)
2
WHT BAL
3