Sony Digital Betacam DVW-700 Operation Manual page 119

!¡ White balance memory indicator
This indicator indicates the currently selected white balance automatic
adjustment memory.
A : The WHITE BAL switch is set to A.
B : The WHITE BAL switch is set to B.
P : The WHITE BAL switch is set to PRST.
M : The WHITE BAL switch of the RM-P9 Remote Control Unit is set
to MANUAL.
!™ Filter indicator
This indicator indicates the currently selected filter types. A number
(from 1 to 4) shows which ND filter is selected, and a letter (from A to
D) shows which CC filter is selected.
!£ Center marker
This marker indicates the center of the viewfinder screen. The marker
appears when its display is set to ON in the MARKER 1 / 2 page of the
setup menu.
You can also fine-tune the position of the center marker to suit the
characteristics of the zoom lens.
!¢ Safety zone marker
This marker indicates an area that is either 80 % or 90 % (factory setting)
of the area of the viewfinder screen.
Use the MARKER 1 / 2 page of the setup menu to select which
percentage of the screen area is marked.
For more information, see Section 4-8-4 "Setting the Marker Display" (page 4-59).
Chapter 4 Adjustments and Settings for Recording
4
4-53