(2) Loosen the screw that adjusts the metal band and remove the intake hose.
Left Side
(3) Remove the negative pressure sensor and mass air flow sensor that locate in the air
cleaner.
Left Side
(4) Lift and remove the bonnet.
WARNING!
Always wear safety shoes, gloves and eye protection for your safety!
1. Loosen the screw in the metal band.
2. Remove the intake hose.
Intake Hose
1. Cut the tie band by the nippers.
2. Disconnect the connector.
Negative pressure sensor
Bonnet
7
Screw
Mass air flow sensor