Shindaiwa DGK70F Service Manual page 22

(3) Remove the 10 bolts and 2 nuts. Separate the stator from the fly wheel housing.
(4) Remove the rotor from the fly wheel.
4) Slowly pull the nylon slings up and lift
5) Insert the wooden support between
6) Unfasten the 10 bolts (M10 x 55) and
2 nuts (M10) that are directly
Bolt
connected to the stator.
Nut
7) Remove the 8 bolts (M10 x 60) that directly
connect the rotor.
8) Pull the stator up with the nylon slings.
Bolt
20
the stator.
the engine cover and bed until the
edge of wood contacts the housing.