Shindaiwa DGK70F Service Manual page 5

Work Safely!
Generators and welders operate at very high
speeds and can do serious damage or
injury if they are misused or abused. Never
allow a person without training or instruction
to operate or service this equipment!
Attention to CAUTION LABEL！
Caution labels are placed on this equipment
and require special attention for operation.
Make sure to locate the labels and
understand the content of the caution.
・Check that caution labels are legible.
Always keep the labels clean or replace
them when worn or damaged
・Clean the labels by cloth, water or
detergent and never use organic solvent or
gasoline which may cause label to peel off.
・Make sure to replace the labels when
damaged or illegible.
Before replacing the label(s), make sure to
place the new label(s) in the same position.
CAUTION!
STOP the equipment immediately when
abnormal circumstances are noticed!
STSTOP the equipment immediately whenever
abnormal circumstances are noticed such
as unusual noise, smell vibration and etc.
It may lead to a serious accident or fatal
damage of the equipment or properties.
Inflammables！
Keep the equipment far away from fire such
as cigarettes when filling fuel, oil or battery
fluid.
NEVER operate or service the equipment
nearby fire as the equipment may catch fire.
No Modification！
NEVER modify the equipment without
manufacturer's advanced approval. .
It may lead to serious safety issues and
damage the equipment.
Inspect the equipment before engine
start for operation and periodical inspection
without fail！
Make sure to inspect before starting engine
and periodically inspect for safety and longer
life of the equipment.
3