Shindaiwa DGK70F Service Manual page 35

(3) Wire the engine . (Left Side)
Torque the screw (M5 x 10)
with the cable by a torque
wrench.
[Fastening Torque]
2.6～3.8 N･m (27～39 kgf･cm)
Left Side
Torque the bolt (M12 x 25) to the
wire harness with a torque wrench.
Torque to the required value.
[Fastening Torque]
37.0～54.0 N･m (377～551kgf･cm)
NOTE: Torque to the required value
with a torque wrench.
Torque to the nut (M10) to the wire
harness with a torque wrench.
[Fastening Torque]
21.0～31.0 N･m (214～316 kgf･cm)
Connect the connector.
33