Shindaiwa DGK70F Service Manual page 37

(5) Wire the stator to the terminal bed.
Breaker
Control Unit
Connect the connector.
Right View
10
Z
Red
20 30
Red
White
Torque the terminals for #L1 (red),
#L2 (white), #L3 (blue), #U (red) and
#W (blue) with the 5 hex. bolts.
[Fastening Torque]
11.0～16.0 N･m (112～163 kgf･cm)
Torque the cable with the screw
(M4 x 10). Torque to the required
value.
Blue
Black
Voltage Selector Switch
Torque the terminal for #10, #11, #20, #21,
#30, #31, #U1 and #W1 to the cam switch
with the 8 bolts (M6 x 12). Torque to the
required value as shown to the illustration
below.
W1
31
35
Blue Red
[Fastening Torque]
1.3～1.9 N･m (14～19 kgf･cm)
21 U1 11
[Fastening Torque]
5.5～6.5 N･m (57～66 kgf･cm)
Blue
Left View