Shindaiwa DGK70F Service Manual page 28

(2) Assemble the exciter stator.
① Mount the exciter stator to the housing.
4) Temporarily put the 6 bolts (M10 x
60) on a diagonal line.
5) Unfasten the 2 guide bolts. (M10 x
100 and M10 x 120)
6) Torque the 2 bolts (M10 x 60) with a
torque
required value described below.
7) Torque the other 6 bolts (M10 x 60)
with a torque wrench. Torque to the
required value.
[Fastening Torque]
49.0～56.0 N･m (500～571 kgf･cm)
Crisscross pattern
1) Torque the 4 bolts (M8 x 40) with a
torque
required value.
[Fastening Torque]
11.0～16.0 N･m (112～163 kgf･cm)
NOTE: Set the exciter stator as the cables
come to the right as arrow shows.
NEVER pinch the cables to avoid the
Bolt
electricac defect.
26
wrench. Torque
wrench. Torque
CAUTION!
to the
to the