(2) Separate the rotor.
4) Put the 2 bolts (M10 x 60) through
the hole mounted in the rotor on a
diagonal line.
5) Fasten the bolt with the eye nut.
(M10)
Eye Nut (M10)
6) Lace the shackle through the eye
nut.
7) Lace the nylon slings through the
shackle.
8) Slowly lift the nylon slings up until
the stator is firmly hold.
WARNING!
Always tightly retain the nylon slings
for your safety!
9) Hammer the outer circumference of the
stator with a soft hammer to lower the
stator.
CAUTION!
NEVER use the iron hammer that may cause
for a defect of the stator.
22
Bolt (M10 x 60)
Shackle