(3) Lay the alternator on the side to the "flat" floor.
(4) Remove the housing.
3
1
2
23
10) Slowly pull the nylon slings up until
the rotor separates from the stator.
Rotor
Stator
11) Slowly lay the alternator on its side
down to the "flat" floor.
12) Always unfasten the bolt #1 (M10 x 35)
first.
13) Install the "threaded" guide bolt (M10 x
100) to prevent a fall. (Refer to "threaded"
guide bolt in the picture on page 24.)
14) Unfasten the bolt #2 & #3. (M10 x 35)