Disassembly & Assembly; Disassembly; Remove The Battery - Shindaiwa DGK70F Service Manual

WARNING!
Before start servicing, prepare;
1. Stop engine and make sure it stopped.
2. Allow the engine and other moving component to cool before servicing.
3. Work on a flat open area. Do not serve the equipment on the tilted ground.
4. Wear a safety glove and/or eye protection such as goggles.
5. Always wear a safety shoes.

Disassembly

1. Remove the battery.

1. Disconnect the clamp and terminal from negative (-) post from the battery first.
2. Disconnect the clamp and terminal from positive (+) post from the battery.
3. Remove the wing nut counter-clockwise.
4. Remove the holder and battery.
IMPORTANT!
Always disconnect the negative (-) terminal first. It might be short-circuited when a metal
tool will contact to the bonnet as the negative (-) terminal is grounded with the bonnet.
There might be a risk of scalds when it is disconnected from the positive (+) terminal.
1
WARNING!
Wear safety goggles and gloves to protect your eyes and hands.
DGK70F
Disassembly & Assembly
2
Wing Nut
4
3