HP ProCurve 9304M Security Manual page 165

Securing SNMP Access
numbers, wildcards, or a combination of the three. The numbers represent the hierarchical location of the object
in the MIB tree. You can reference individual objects in the MIB tree or a subset of objects from the MIB tree.
To configure the number of SNMP views available on the HP device:
ProCurveRS(config)# system-max view 15
Syntax: system-max view <number-of-views>
This command specifies the maximum number of SNMPv2 and v3 views that can be configured on a device. The
number of views can be from 10 – 65536. The default is 10 views.
To add an SNMP view, enter one of the following commands:
ProCurveRS(config)# snmp-server view Maynes system included
ProCurveRS(config)# snmp-server view Maynes system.2 excluded
ProCurveRS(config)# snmp-server view Maynes 2.3.*.6 included
ProCurveRS(config)# write mem
NOTE: The snmp-server view command supports the MIB objects as defined in RFC 1445.
Syntax: [no] snmp-server view <name> <mib_tree> included | excluded
The <name> parameter can be any alphanumeric name you choose to identify the view. The names cannot
contain spaces.
The <mib_tree> parameter is the name of the MIB object or family. MIB objects and MIB sub-trees can be
identified by a name or by the numbers called Object Identifiers (OIDs) that represent the position of the object or
sub-tree in the MIB hierarchy. You can use a wildcard (*) in the numbers to specify a sub-tree family.
The included | excluded parameter specifies whether the MIB objects identified by the <mib_family> parameter
are included in the view or excluded from the view.
NOTE: All MIB objects are automatically excluded from any view unless they are explicitly included; therefore,
when creating views using the snmp-server view command, indicate which portion of the MIB you want users to
access.
To delete a view, use the no parameter before the command.
June 2005 10 - 11