HP ProCurve 9304M Security Manual page 158

Security Guide for ProCurve 9300/9400 Series Routing Switches
3. Click the Community String link to display the SNMP Community String panel. This panel shows a list of
configured community strings.
For example,
4. Click Add Community String to display the SNMP Community String fields.
5. Select the type of community string you are adding by clicking the "Get" or "Set" button. "Get" provides read­
only access, while "Set" provides read-write access.
6. Enter the name of the community string.
7. Encryption is enabled by default. Remove the checkmark from the Encrypt box if you want to disable
encryption of the string display. If you disable encryption, other users can view the community string.
To re-enable encryption, place a checkmark in the Encrypt box.
8. Enter a name for the view that will be assigned to the community string.
9. Enter the number of the ACL that will be used to filter SNMP packets for this community string.
NOTE: In this release, ACL by name is not supported in the Web Interface.
Here is an example of a completed form.
10 - 4 June 2005