Introduction
This guide describes how to secure access to management functions on the following ProCurve Routing
Switches:
•
ProCurve Routing Switch 9315M
•
ProCurve Routing Switch 9308M
•
ProCurve Routing Switch 9304M
•
ProCurve Routing Switch 9408sl
In addition, this guide explains how to secure SNMP access to these ProCurve Routing Switches, as well as how
to protect them from Denial of Service (DoS) attacks.
Software Versions Covered
This edition describes software release 07.8.00a for the following ProCurve products:
•
9304M
•
9308M
•
9315M
This edition also describes software release 01.0.02 for the ProCurve 9408sl Routing Switch.
NOTE: The software release for the 9408sl is 02.1.00. See the Release Notes for the most current information,
which supercedes the information in this guide.
Audience
This manual is designed for system administrators with a working knowledge of Layer 2 and Layer 3 switching and
routing.
If you are using a ProCurve Routing Switch, you should be familiar with the following protocols if applicable to your
network—IP, RIP, OSPF, BGP4, IGMP, PIM, DVMRP, IPX, AppleTalk, and VRRP.
Chapter 1
Getting Started
1 - 1