HP ProCurve 9304M Security Manual page 131

The following table describes the information displayed by the show authenticated-mac-address command.
Table 6.1: Output from the show authenticated-mac-address command
This Field...
Port
Vlan
Accepted MACs
Rejected MACs
Attempted-MACs
Displaying Multi-Device Port Authentication Configuration Information
To display information about the multi-device port authentication configuration, enter the following command:
ProCurveRS# show authenticated-mac-address configuration
Feature enabled
Number of Ports enabled
--------------------------------------------------------------------------
Port Fail-Action
--------------------------------------------------------------------------
1/18 Block Traffic
1/20 Block Traffic
1/22 Block Traffic
4/5 Block Traffic
Syntax: show authenticated-mac-address configuration
The following table describes the information displayed by the show authenticated-mac-address configuration
command.
Table 6.2: Output from the show authenticated-mac-address configuration command
This Field...
Feature enabled
Number of Ports enabled
Port
Fail-Action
June 2005
Displays...
The port number where the multi-device port authentication feature is
enabled.
The VLAN to which the port has been assigned.
The number of MAC addresses that have been successfully
authenticated
The number of MAC addresses for which authentication has failed.
The rate at which authentication attempts are made for MAC
addresses.
: Yes
: 4
Fail-vlan Dyn-vlan
1 No
1 No
1 No
1 No
Displays...
Whether the multi-device port authentication feature is enabled on the
HP device.
The number of ports on which the multi-device port authentication
feature is enabled.
Information for each multi-device port authentication-enabled port.
What happens to traffic from a MAC address for which RADIUS
authentication has failed: either block the traffic or assign the MAC
address to a restricted VLAN.
Configuring Multi-Device Port Authentication
MAC-filter
No
No
Yes
No
6 - 9