HP ProCurve 9304M Security Manual page 115

Configuring 802.1X Port Security
ProCurveRS(config)# interface e 1
ProCurveRS(config-if-e100-1)# dot1x port-control auto
ProCurveRS(config-if-e100-1)# exit
ProCurveRS(config)# interface e 2
ProCurveRSconfig-if-e100-2)# dot1x port-control auto
ProCurveRS(config-if-e100-2)# exit
ProCurveRS(config)# interface e 3
ProCurveRS(config-if-e100-3)# dot1x port-control auto
ProCurveRS(config-if-e100-3)# exit
Hub Configuration (Releases Prior to 07.8.00)
Figure 4.7 illustrates a configuration where three 802.1X-enabled Clients are connected to a hub, which is
connected to a port on the HP device. The configuration is similar to that in Figure 4.6, except that 802.1X port
security is enabled on only one port, and the multiple-hosts command is used to allow multiple Clients on the
port.
Figure 4.7 Sample 802.1X configuration using a hub
RADIUS Server
(Authentication Server)
HP Device
(Authenticator)
Hub
Clients/Supplicants running 802.1X-compliant client software
June 2005 4 - 29