HP ProCurve 9304M Security Manual page 111

Routing switches
Table of Contents

Advertisement

The following is an example of the output of the show dot1x command. The information related to multiple-host
authentication is highlighted in bold.
ProCurveRS# show dot1x
Number of Ports enabled
Re-Authentication
Authentication-fail-action
Authentication Failure VLAN
Mac Session Aging
Mac Session max-age
Protocol Version
quiet-period
tx-period
supptimeout
servertimeout
maxreq
re-authperiod
security-hold-time
re-authentication
Flow based multi-user policy
Syntax: show dot1x
Table 4.4 describes the bold fields in the display.
Table 4.4: Output from the show dot1x command for multiple host authentication
This Field...
Authentication-fail-action
Authentication Failure VLAN
Mac Session Aging
Mac Session max-age
Flow based multi-user policy
In release 07.8.00, the output of the show dot1x config command for an interface was changed so it displays
only the configured port control for the interface. For example:
ProCurveRS# show dot1x config e 1/3
Port-Control: control-auto
Syntax: show dot1x config <portnum>
Table 4.5 lists the field in the display.
June 2005
: 2
: Enabled
: Restricted VLAN
: 111
: Disabled for permitted MAC sessions
: 60 seconds
: 1
: 5 Seconds
: 30 Seconds
: 30 Seconds
: 30 Seconds
: 2
: 3600 Seconds
: 60 Seconds
: Enable
: Disable
Displays...
The configured authentication-failure action. This can be Restricted
VLAN or Block Traffic.
If the authentication-failure action is Restricted VLAN, the ID of the
VLAN to which unsuccessfully authenticated Client ports are
assigned.
Whether aging for dot1x-mac-sessions has been enabled or disabled
for permitted or denied dot1x-mac-sessions.
The configured software aging time for dot1x-mac-sessions.
The dynamically assigned IP ACLs and MAC address filters used in
the 802.1X multiple-host configuration. Note that release 07.8.00
does not support dynamically assigned IP ACLs and MAC address
filters in an 802.1X multiple-host configuration. This functionality will
be added in a future release.
Configuring 802.1X Port Security
4 - 25

Advertisement

Table of Contents
loading

This manual is also suitable for:

J4139aProcurve 9308mJ4874aProcurve 9408slJ4138aJ8680a ... Show all

Table of Contents