Security Guide for ProCurve 9300/9400 Series Routing Switches
Information on Configuring Features for 9300 Series and 9408sl Routing Switches
•
Port settings
•
VLANS
•
Trunks
•
Spanning Tree Protocol
•
Syslog
Quick Start Guide for ProCurve 9300 Series Routing Switches
This is a printed guide you can use as an easy reference to the installation and product safety information needed
for out-of-box setup, plus the general product safety and EMC regulatory statements of which you should be aware
when installing and using a Routing Switch.
Installation and Basic Configuration Guide for the ProCurve 9408sl Routing Switch
This is a printed guide that describes the ProCurve 9408sl and provides procedures for installing modules and AC
power supplies into the ProCurve 9408sl, cabling the 10-Gigabit Ethernet interface ports, and performing a basic
configuration of the software.
Topics Specific to the 9408sl Routing Switch
•
Product overview and architecture
•
Product mounting instructions
•
Module installation
•
Basic access and connectivity configuration (passwords, IP addresses)
•
Management Module redundancy and file systems
•
Interacting with the cooling system, switch fabric module, and interface modules
•
Basic software feature configuration (SNMP, clock, mirror/monitor ports)
•
Hardware maintenance instructions
•
Software update instructions
•
Hardware specs
•
Safety and regulatory statements
•
Software specs (e.g. RFC support, IEEE compliance)
Advanced Configuration and Management Guide for ProCurve 9300/9400 Series Routing Switches
This is an electronic (PDF) guide that contains advanced configuration information for routing protocols and
Quality of Service (QoS). In addition, appendixes in this guide contain reference information for network
monitoring, policies, and filters.
Information on Configuring Features
•
Quality of Service (QoS)
•
Access Control Lists (ACLs)
•
Rate limiting
•
IPv4 routing
•
RIP
•
IP Multicast
•
OSPF
•
BGP4
•
Multi-protocol BGP (MBGP)
•
Network Address Translation (NAT)
x
June 2005