HP ProCurve 9304M Security Manual page 112

Security Guide for ProCurve 9300/9400 Series Routing Switches
This Field...
Port-Control
Displaying Information About the dot1x-mac-sessions on Each Port
To display information about the dot1x-mac-sessions on each port on the device, enter the following command:
ProCurveRS# show dot1x mac-session
Port
-----------------------------------------------------------------------
3
3
Syntax: show dot1x mac-session
Table 4.6 describes the information displayed by the show dot1x mac-session command.
Table 4.6: Output from the show dot1x mac-session command
This Field...
Port
MAC/IP Address(username)
Vlan
4 - 26
Table 4.5: Output from the show dot1x config command
Displays...
The configured port control type for the interface. This can be one of
the following:
force-authorized – The port's controlled port is placed
unconditionally in the authorized state, allowing all traffic. This is the
default state for ports on the HP device.
force-unauthorized – The controlled port is placed unconditionally in
the unauthorized state. No authentication takes place for any
connected 802.1X Clients.
auto – The authentication status for each 802.1X Client depends on
the authentication status returned from the RADIUS server.
MAC/IP Address(username)
0007.e90f.eb30 :kingcobra
0007.e90f.eaa1 :cobra
Displays...
The port on which the dot1x-mac-session exists.
The MAC address of the Client and the username used for RADIUS
authentication.
The VLAN to which the port is currently assigned.
Vlan Auth Age CAM
State Index
102 permit 1 N/A
102 permit 6 N/A
June 2005