This field
Condition Configuration:
Condition Monitoring:
CPU Condition:
Layer 2 CAM Condition:
Displaying Action Information
To display information about actions configured on the device, enter the following command:
ProCurveRS# show l2-cpupro actions
Action Configuration:
1: action(03) q-aging(Ena) Deactivated
2: action(03) hw-flood(Ena) Deactivated
Action Execution:
Quick Aging: enabled
Not in Quick Aging mode
Normal age limit: 126
Quick age limit: 63
HW Flooding:
unknown-unicast: installed not activated
max entries: 256, current entries: 5
action mode:flooding
multicast: installed not activated
max entries: 256, current entries: 5
action mode:flooding
broadcast: installed not activated
max entries: 256, current entries: 5
action mode:flooding
Syntax: show l2-cpupro actions
Table 8.2 lists the output of the show l2-cpupro actions command.
June 2005
Table 8.1: Output of the show l2-cpupro condition command
Displays
The conditions configured on the device. These include the
three pre-configured conditions, as well as any user-configured
conditions.
Whether any of the conditions has surpassed its declaring
watermark.
Whether the condition defined for CPU usage percentage has
surpassed its declaring watermark, as well as the condition's
declaring watermark, clearing watermark, and the number of
times the declaring watermark has been exceeded.
Whether the condition defined for Layer 2 CAM usage
percentage has surpassed its declaring watermark, as well as
the condition's declaring watermark, clearing watermark, and
the number of times the declaring watermark has been
exceeded.
Configuring CPU Protection
8 - 5