Garmin G1000 Pilot's Manual page 222

GPS NAVIGATION
OR :
1) Press the PROC Softkey.
2) Highlight 'SELECT ARRIVAL'.
3) Press the ENT Key. The ARRIVAL window is displayed on the 'PROC – ARRIVAL LOADING' Page.
4) Select an arrival.
5) Press the ENT Key. The TRANSITION window is displayed.
6) Select a transition.
7) Press the ENT Key. The RUNWAY window may be displayed. If so, select a runway.
8) Press the ENT Key.
9) With 'LOAD' highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.
OR :
1) From the Active Flight Plan page, press the MENU Key.
2) Highlight 'Load Arrival'.
3) Press the ENT Key. The ARRIVAL window is displayed on the 'PROC – ARRIVAL LOADING' Page.
4) Select an arrival.
5) Press the ENT Key. The TRANSITION window is displayed.
6) Select a transition.
7) Press the ENT Key. The RUNWAY window may be displayed. If so, select a runway.
8) Press the ENT Key.
9) With 'LOAD' highlighted, press the ENT Key. The arrival procedure is displayed as part of the overall flight plan
and is placed in front of the enroute flight plan.
OR :
1) Select the Arrival Information Page.
2) Press the MENU Key.
3) Highlight 'Load Arrival'.
4) Press the ENT Key. The Active Flight Plan Page is displayed. The arrival procedure is displayed as part of the
overall flight plan and is placed after the enroute flight plan.
5-100 Garmin G1000 Pilot's Guide for the Diamond DA40/40F 190-00592-02 Rev. A