Garmin G1000 Pilot's Manual page 266

HAZARD AVOIDANCE
SETTING UP TERRAIN ON THE NAVIGATION MAP PAGE
Use the Map Setup Window (Figure 6-48) to customize the display of obstacle and terrain data on the
Navigation Map Page. Data displays only if it is selected.
Setting up and customizing the Navigation Map Page:
1) On the Navigation Map Page, press the MENU Key.
2) While the 'Map Setup' selection is highlighted on the Page Menu, press the ENT Key.
3) Turn the small FMS Knob to display the group selection window. To select the 'Map' group, turn the FMS Knob
and press the ENT Key.
4) While the Map Setup menu is displayed, turn the large FMS Knob to highlight and move between the
selections.
5) When an item is highlighted, turn the small FMS Knob to select the desired option and press the ENT Key.
Table 6-7 shows the options for displaying terrain and obstacle data on the Navigation Map only. It does
not apply to other maps.
6-34
Figure 6-42 Map Setup Window
TERRAIN OBSTACLE
DATA DATA
OFF OFF
OFF ON
ON OFF
ON ON
Table 6-7 Obstacle and Terrain Data on the Navigation Map Page
Garmin G1000 Pilot's Guide for the Diamond DA40/40F
DISPLAYED ON NAVIGATION MAP PAGE
No obstacles or terrain displayed
SAFE, CAUTION, and WARNING obstacles
displayed
CAUTION and WARNING terrain displayed
SAFE, CAUTION, and WARNING obstacles
and terrain displayed
190-00592-02 Rev. A