Preparing the HPLC System
1 Turn on the Agilent ChemStation PC and the monitor.
2 Turn on the 1200 series HPLC modules.
3 Start the Agilent ChemStation software (B.02.01). If the pump,
Figure 10
1200 Series Variable Wavelength Detector User Manual
autosampler, thermostatted column compartment and detector are found,
the ChemStation screen should look like shown in
The System status is red (Not Ready).
System status
On-line plot window
Initial ChemStation screen (Method and Run Control)
Using the Detector
Figure
10.
details window
4
45