4
Using the Detector
Requirements and Conditions
What You Will Need
Table 7 lists the items you need to have for the set up of the analysis. Some of
these are optional (not required for the basic system).
Table 7
1200 system
Column:
Standard:
The G1314C VWD-SL can be operated with a G1323B Control Module just in standard mode
N O T E
as G1314B - no higher data rate selection is available.
42
What you will need
Pump (plus degassing)
Autosampler
Detector, standard flow cell installed
Agilent ChemStation (B.02.01 and above) or
Instant Pilot G4208 (A.01.01 and above) (optional for basic operation) or
Control Module G1323B (B.04.02 and above) (optional for basic operation), see
note below.
System should be correctly set up for LAN communication with the Agilent
ChemStation
Zorbax Eclipse XDB-C18, 4.6 x 150 mm, 5 um
Part No. 993967-902 or Part No. 5063-6600
Part No. 01080-68704
0.15 wt.% dimethylphthalate, 0.15 wt.% diethylphthalate, 0.01 wt.% biphenyl,
0.03 wt.% o-terphenyl in methanol
1200 Series Variable Wavelength Detector User Manual