Preparing the HPLC System
1 Turn on the Agilent ChemStation PC and the monitor.
2 Turn on the 1200 series HPLC modules.
3 Start the Agilent ChemStation software (B.02.01). If the pump,
Figure 8
1200 Series DAD and MWD User Manual
autosampler, thermostatted column compartment and detector are found,
the ChemStation screen should look like shown in
The System status is red (Not Ready).
System status
On-line plot window
Initial ChemStation screen (Method and Run Control)
Using the Detector
Figure
8.
details window
4
49