Updating Databases - Garmin G1000 Cockpit Reference Manual

Level 1 Level 2
WX
RADAR
BACK
DCLTR (3)
SHW CHRT
CHKLIST

UPDATING DATABASES

CAUTION: Never disconnect power to the system when loading a database.
Power interruption during the database loading process could result in
maintenance being required to reboot the system.
NOTE: When loading database updates, the 'DB Mismatch' message will
be displayed until database synchronization is complete, followed by turning
system power off, then on. Synchronization can be monitored on the AUX-
SYSTEM STATUS Page.
NOTE: DO NOT use the database SD cards for any purpose other than database
storage.
In some cases it may be necessary to obtain an unlock code from Garmin in order
to make the database product functional. It may also be necessary to have the system
configured by a Garmin authorized service facility in order to use some database features.
If an error occurs during synchronization, an error message will be displayed,
190-00645-07 Rev. A
Level 3
Garmin G1000 Cockpit Reference Guide for the Quest KODIAK
Description
Displays/removes airborne weather
radar information on Navigation Map
Page
Returns to top-level softkeys
Selects desired amount of map detail;
cycles through declutter levels:
DCLTR (No Declutter): All map
features visible
DCLTR-1: Declutters land data
DCLTR-2: Declutters land and SUA
data
DCLTR-3: Removes everything except
the active flight plan
When available, displays optional
airport and terminal procedure charts
When available, displays optional
checklists
Appendix
121
100
™